Jaw Plate Material Selection

Jaw Plate Material Selection

Jaw Plate Material Selection The impact of jaw plate wearable reason is mainly wear-resistant material hardness and toughness. ① material is too hard, the material extrusion depth is shallow, the material deformation is small, the material for material short-range sliding chisel cut is also small; ② material toughness, resistance to fracture ability, can eliminate squeezing impact…

High Chrome Jaw Plate

High Chrome Jaw Plate

High Chrome Jaw Plate Although the jaw crusher has the lowest crushing and wear cost, it is common for a set of tooth plates to survive for more than 100 hours, even tens of hours, in hard, strong abrasive materials such as granite and basalt. Quartzite and corundum is more only ten hours or even…

Jaw Plate Production Process

JYS Casting’s Jaw Plate Production Process

JYS Casting’s Jaw Plate Production Process Smelting process Smelting was carried out in a 500Kg acidic medium frequency electric furnace. (1) prior to the addition of 500Kg acidic medium frequency furnace melting scrap and pig iron clean, then add chromium iron, tungsten, iron, nickel, steel composition adjustment. (2) 5 to 10 minutes before the steel…

JYS CASTING WRONG WALL

  JYS CASTING WRONG WALL ! jys casting words:we are not afraid of a mistake, we are afraid of no improvement measures, mistake once more appearing! Failure is the mother of success, the wall of mistake is the most precious wealth of our company. This wrong wall warning us never let the mistake once more…